产品规格:
产品数量:
包装说明:
关 键 词:上海纤维级PP塑料
行 业:塑料 通用/工程塑料 通用塑料
发布时间:2021-07-24
PP原料--PP玻璃化转变温度和熔点:等规聚PP材料在特定温度下的力学性能依赖于其玻璃化转变温度。在低温下,整个分子链被冻结,分子运动被阻:,随着温度升高,分子链的运动性逐渐增加,力学性能相应地随着温度变化而发生变化。低于玻璃化转变温度时,等规聚PP的无定形部分处于较硬较脆的玻璃态,当温度升高,达到玻璃化转变温度时,这一部分由玻璃态转变为较软较韧的橡胶态。等规聚PP片晶熔融的温度称为熔点。在低温下,很多塑料会变硬变脆,脆化温度定义为,在特定的冲击条件下,50%的被测试样发生脆性断裂的温度。脆化温度与玻璃化转变温度有很紧密的联系,因此,玻璃化转变温度决定了等规聚材在保证冲击强度没有明显降低前提下的低使用温度。等规聚均聚物的脆化温度约为5-15℃。
聚为无毒、无臭、无味的乳白色高结晶的聚合物,密度只有0. 90--"0. 91g/cm3,是目前所有塑料中轻的品种之一。它对水特别稳定,在水中的吸水率仅为0. 01%,分子量约8万一15万。成型性好,但因收缩率大(为1%~2.5%).厚壁制品易凹陷,对一些尺寸精度较高零件,很难于达到要求,制品表面光泽好。
PP冲击强度:等规聚均聚物在室温时冲击强度比-30℃下的冲击强度高得多,这是因为在低于玻璃化转变温度的温度下,材料呈现出脆性。常见的评价等规聚PP抗冲击性能的方法有简支梁和悬臂梁方法。在测试中,常常在试样上设置一个缺口,这会造成应力集中,使试样发生脆性断裂,缺口的存在同时在处构建了一个平面应变的环境。试样的冲击强度与分子链本身微观结构和加工过程中形成的形态有关。分子量增加,冲击强度增加,引人共聚单体可以使冲击强度显着提高。提高聚PP冲击强度的重要方法就是在聚基体内引入橡胶相,如多相共聚物聚材料。随着橡胶含量的增加,材料的韧性增加,脆—韧转变温度也随之向低温移动。
聚具有许多优良特性:
1、相对密度小,仅为0.89-0.91,是塑料中轻的品种之一。
2、良好的力学性能,除耐冲击性外,其他力学性能均比聚好,成型加工性能好。
3、具有较高的耐热性,连续使用温度可达110-120℃。
4、化学性能好,几乎不吸水,与绝大多数化学药品不反应。
5、质地纯净,无毒性。
6、电绝缘性好。
7、聚制品的透明性比高密度聚制品的透明性好。
它有很多优点但也有缺点:
1、制品耐寒性差,低温冲击强度低。
2、制品在使用中易受光、热和氧的作用而老化。
3、着色性不好。
4、易燃烧。
5、静电度高,染色性、印刷性和黏合性差。
随着人们生活水平不断提高,必然带来在文化、、食品、、材料、居室装饰等各个方面不同变化的要求与提高,市场中很多物品越来越多地使用透明材料。因此,开发透明PP料是一个很好的发展趋势,尤其需要透明性高、流动性好,成型快的PP料,以便设计加工们喜爱的PP制品。透明PP比普通PP、PVC、PET、PS更具特色,有更多优点和开发前景。
近几年,国外透明PP市场增长很快,如韩国将透明PP作为PET替代品推向市场;德国某些公司用透明PP替代PVC;美国透明PP制品的增长速度高出普通PP制品7%~9%;日本近几年PP成核透明剂的年用量约为2000t,若以添加量0.25%推算,日本透明PP料的年产量可达80万t以上。据日本理化株式会社介绍,日本透明PP料用于微波炊具及家具两方面的消费量大。预计,2005年国外市场对透明PP料需求量约为500万~550万t。目前国内透明PP料与国外差距较大,透明PP树脂及其制品的生产、应用仍有待加强。